In the field case, although many automatic mixer trucks use suitable dust removal equipment, the dust removal effect is still not good. In some cases, after the dust removal equipment is installed, the negative pressure generated by the weighing hopper affects the accuracy of powder weighing. Therefore, it is important to reasonably use the dust removal equipment of the mixer truck.
The user can install a butterfly valve at the bottom of the dust accumulation hopper. The dust collector is closed when it works. All the induced air pipes are connected to the side flanges of the dust accumulation hopper, providing a space for settling the dust blown by the pulse, and avoiding the secondary pollution of the filter element of the dust collector.
At the site of the automatic mixer truck, some users directly connect the induced air pipe of the automatic mixer truck to the lower part of the dust hopper of the dust collector in order to save costs. However, due to the suction of the fan, the dust blown by the pulse cannot settle to the bottom and flow to the main engine, so that the filter element is always surrounded by dust. Since the dust does not settle, the working efficiency of the dust collector is greatly reduced.
Users should correctly design and reasonably apply the dust removal equipment during the operation of the automatic mixer truck. It can not only avoid dust pollution, but also greatly improve the overall performance of the mixer truck.
At the site of the automatic mixer truck, users can open the butterfly valve regularly every four or five hours to clean up the collected dust according to the actual situation, and discharge the dust into the mixer truck, thus reducing the labor intensity.
With the summary above the automatic self-feeding mixer, I hope it can help our customers. If you have any questions or need help, please click our website: http://www.bckjfp.com.cn Or call for consultation, and we will do our best to solve it for you